2'' Hexagon Black Peel and Stick Tile
Weight and Dimension
| Overall Thickness | 0.12'' |
| Tile Lenght | 11.42'' |
| Tile Width | 11.42'' |
| Sheet per Box | 10 |
|
Square feet per sheet |
0.9 |
| Square feet per box | 9.0 |
| Overall Product Weight (lb) | 9.26 |
Specification
| Instalation Method | Peel and Stick |
| Finish | Matte |
| Shade Variation | V1 |
| Mosaic Pattern | Hexagon |
| Outdoor Use | No |
| Water Resistant | Yes |
| Heat Resistant | Yes |
| On the Wall | Yes |
| On the Floor | No |
| Shower Wall | Yes |
| Behind Gas Stove | Yes |
| Behind the Sink | Yes |
| On the Fireplace | Yes |
Inno Stickers® offer you a great option: save money and save time!
Among other features, this time saving is atrributed our unique and warrantied adhesive. No mortar means a less messy job! We used the same powerful adhesive on all of our products, and all of our products are guranteed for 10 years!
Stone Composite
Inno Stickers® use Stone Composite as the raw material, which is 100% ecofriendly.
Stone Composite are natural materials, which is free of heavy metals, phthalate, formaldehyde and other harmful substances. The main component is mineral stone powder, polymer powder etc., which are naturally not afraid of water. So you don't have to worry about that it will blister, mildew or out of shape due to temperature fluctuation. It can be used in kitchen, bathroom, fireplace, living room, etc. The fire resistance and fire prevention can reach to class B1, so also can be used in public space.
DARE TO COMPARE
See for yourself how Inno Stickers® are so much faster to install than traditional tiles!
Inno Stickers® is very easy to install, just follow these steps!
-
Measure the pattern and then mark on the wall or tiles surface. Cut the tile with a utility knife and snapped apart manually or with pliers.
- Remove the peel-away backing from tile and place in desired location on wall or surface.
- When all the tiles are in place, press firmly to ensure that the mosaic tile sheets have a strong bond to the wall or surface.
- For accurate cutting, Jig saw, chop saw, rotary tools or any of the mechanical cutting tools is required.
- TIP: We strongly suggest to use a 500 to 750 ml spray bottle, fill it with water and add 1 to 2 teaspoons of mild dish soap. Spray lightly the back of tile before you install it and spread the liquid on the whole surface of the tile with your hand. This will allow you to position them easily on your wall.
FRECUENTLY ASKED QUESTIONS
Have a question? Find answer here!
1. DO YOU HAVE TO GROUT THESE TILES？
Inno Stickers® peel and stick tile don't need grout, only peel and stick.
2. WHAT TOOL WILL BEST CUT THESE TILES?
Cut straight edges: You can use a ulitity knife and snapped apart manually or with pliers
Cut through tiles or make a hole: chop saw, jig saw or rotary tools
3. ON WHAT SURFACES CAN INNO STICKERS® BE INSTALLED ?
Inno Stickers® tile can be installed on any clean, smooth, leveled and primed surface (if drywall). Therefore, they can be installed over existing tiles if those meet the criteria’s mentioned above.
4. CAN I PUT INNO STICKERS® OVER A EXISTING KITCHEN BACKSPLASH？
Yes, you can use it on a existing backsplash, but make sure the surface is clean and leveled
5. ARE THESE EASY TO REMOVE?
The adhesive used on Inno Stickers® is very strong, they are not easy to remove, However, a wallpaper scraper is generally a good tool for removing Inno Stickers®. Also you can use a hair dryer to heat the tile for removing.
6. CAN INNO STICKERS® BE USED ON THE FLOOR?
No, Inno Stickers® is only for the wall, can not be used on the floor.
7. WHAT IS THE MAXIMUM TEMPERATURE INNO STICKERS® CAN BE EXPOSED TO?
Inno Stickers® resist temperatures of up to 88 °C (190°F). Caution! For safety reasons, Inno Stickers® should never be exposed to a direct flame.
8. WOULD INNO STICKERS® WORK IN THE SHOWER WALL?
Inno Stickers® can be used on shower wall, but please check the surface is clean and smooth
9. ON WHAT SURFACES CAN INNO STICKERS® BE INSTALLED?
Inno Stickers® can be installed on any clean, smooth, leveled and primed surface (if drywall). Therefore, they can be installed over existing tiles if those meet the criteria’s mentioned above.
For more questions, please send a e-mail to: inno@innostickers.com, and we will reply you in 24 hours.
Customer Reviews
Clean wall with alcohol wipes and let dry 5-10 minutes, Use Musssel bound double side adhesive on wall and (use sharp cutter) because tiles are difficult to cut .Apply sticky tiles and i also used Kwick seal caulk between tiles gap.
These are great quality. They aren’t your typical peel and stick flimsy tiles. These are thick and a little difficult to cut but if you have the right materials they are beautiful. I have received many compliments on my kitchen backsplash and nobody can even tell that they aren’t real tiles
It seems good
I love this backsplash! The only reason I’m rating it a 4 is because it’s a bit difficult to cut. If you’re sticking up multiple layers, try using blue tape to get everything situated before sticking to the wall. To successfully link the hexagons together flush, they have to be situated just so!
I will buy again!